PRODUCTS

Engineering Services


 

Fuel Products

 
Inline Fuel Fittings
In-line fuel fittings have shut-offs in both sides, so simply disconnect by sliding the stainless catch, and remove the tank! Both sides are barbed for tubing of your size selection.
 
 

 
 
 

 
 
 
 

   
Inline Fuel Fittings - Plastic
For tubing. Various sizes availible.
      1/4"                                  5/16"                        |       3/8"                         C  
High flow applications? Same parts, but without shut-off feature allow more fuel to flow.       1/4"                                  5/16"                        |       3/8"                         C

   
Inline Fuel Fittings - Metal
For tubing. Various sizes availible.       1/4"                                  5/16"                        |       3/8"                         C  
High flow applications? Same parts, but without shut-off feature allow more fuel to flow.       1/4"                                  5/16"                        |       3/8"                         C
 
Crossover Fuel Fittings
Tanks with cross over tubes are a pain to remove, since you have to drain the gas...No longer! These fittings have shut-offs in both sides, so simply disconnect by sliding the stainless catch, and remove the tank! Better yet, install a set on each side of the tank, and the cross over remains in place so you don't have to re-thread it through the tricky head / exhaust / carb area. Tank side is threaded 1/8NPT and tube side is barbed for 1/4" tubing. Since they install directly into tank, no worries about in-line hardware vibrating and rubbing against hot parts while you moto. Prepare your bike better than the pros!
 

   
Crossover Fuel Fittings - Plastic
TUBE / THREADED FITTINGS 1/4" (6mm) / 1/8 NPT        
2 Sets (Install on Each Side of Tank) 1/4" (6mm) / 1/8 NPT"      






   
Crossover Fuel Fittings - Metal
TUBE / THREADED FITTINGS 1/4" (6mm) / 1/8 NPT        
2 Sets (Install on Each Side of Tank) 1/4" (6mm) / 1/8 NPT